Carbon Steel
For general industrial, oil and gas, refinery, utility and process applications.
Typical grades: ASTM A106 Gr. B and C, A105, A234 WPB, A216 WCB and equivalent EN grades.
Special Materials
Materials selected for demanding service conditions.
Valmeronis supplies materials for applications involving pressure, temperature, corrosion, impact resistance and critical process conditions.
We review the product specification, material grade, applicable standard, testing requirements and required certification before proposing a suitable European supply source.
Low Temperature Carbon Steel
For low temperature and cryogenic service where impact strength and toughness are essential.
Typical grades: ASTM A333 Gr. 3, Gr. 6 and Gr. 8, A350 LF2 and LF3, A420 WPL3 and WPL6, A352 LCB and LCC.
Stainless Steel and High Alloy Grades
For corrosive environments, hygienic processes, high temperature service and demanding industrial applications.
Typical grades: 304, 304L, 316, 316L, 321, 321H, 347, 347H, 904L, 254 SMO and 6Mo.
Duplex and Super Duplex
For high strength and resistance to chloride corrosion, seawater and aggressive process conditions.
Typical grades: UNS S31803, S32205, S32750 and S32760, including F51, F53 and F55.
Chrome Moly Alloy Steel
For elevated temperature and high pressure applications in refineries, power plants, boilers and process facilities.
Typical grades: ASTM A335 P5, P9, P11, P22 and P91 with corresponding WP and F grades.
Nickel and Corrosion Resistant Alloys
For chemical processing, acids, seawater and other highly corrosive or critical applications.
Typical grades: Monel 400, Inconel 600 and 625, Incoloy 800, 800H and 825, Hastelloy C276 and Alloy 20.
Titanium, Copper Nickel and Non Ferrous Alloys
For seawater, desalination, heat exchanger, marine and specialised process applications.
Typical grades: Titanium Grades 2 and 5, Copper Nickel 90/10 and 70/30, aluminium bronze, bronze and brass.
Cast Materials for Valves and Pumps
Cast materials selected according to pressure, temperature, fluid and operating conditions.
Typical grades: Cast carbon steel, stainless steel, duplex, alloy steel, ductile iron, cast iron, bronze and nickel alloy castings.
Material Forms
Materials available across complete industrial supply packages.
Pipes and tubes, flanges, butt weld fittings and forged fittings
Valves, pumps, pump components and instrumentation
Spectacle blinds, spades, spacers, fasteners and gaskets
Custom machined, forged, cast and fabricated items
The listed grades are indicative. Final material selection remains subject to the customer’s specification, service conditions, applicable standards and engineering approval.